Your solar panels are designed to deliver decades of clean, renewable energy — but like any electrical system, they can experience issues over time. When that happens, knowing what’s normal and what requires professional help can save you time and money.
At Sunaura Solar, we specialize in identifying and resolving all types of solar system issues — from inverter malfunctions to wiring faults. Here’s a breakdown of the most common problems homeowners face and how professionals fix them.
1. Decreased Energy Production
If your energy output suddenly drops, it’s often due to environmental factors or electrical inconsistencies.
Possible Causes:
- Dust, pollen, or bird droppings on panels
- Faulty inverter or damaged wiring
- Shading from trees or nearby structures
Sunaura Solar’s Fix:
We clean panels safely, inspect for obstructions, and run voltage tests to pinpoint the issue — ensuring your system returns to full production.
2. Faulty Inverter Performance
The inverter is the heart of your solar system, converting DC to AC power. If it fails, your entire system may stop producing electricity.
Possible Causes:
- Internal hardware failure
- Loose connections or overheating
- Outdated firmware or software errors
Sunaura Solar’s Fix:
We perform diagnostic testing, update firmware, replace faulty components, and verify stable power conversion.
3. Damaged or Dirty Panels
Even minor cracks or dirt buildup can block sunlight and reduce panel efficiency.
Possible Causes:
- Storm debris or hail damage
- Dust accumulation or water spots
- Improper cleaning methods
Sunaura Solar’s Fix:
We conduct detailed inspections, safely clean panels using purified water, and replace any panels with compromised glass or cells.
4. Wiring and Connection Failures
Wiring issues are a leading cause of reduced performance or intermittent system outages.
Possible Causes:
- Loose connectors
- Corrosion due to weather exposure
- Damage from rodents or roof work
Sunaura Solar’s Fix:
We inspect all wiring routes, replace corroded connections, and resecure cables using weather-rated fittings for long-term safety.
5. Monitoring System Errors
If your app shows missing or inaccurate data, your system may be underperforming without you knowing it.
Possible Causes:
- Internet connectivity problems
- Communication errors between inverter and monitoring platform
- Faulty sensors
Sunaura Solar’s Fix:
We restore network connections, update monitoring software, and verify real-time production data for accuracy.
6. Ground Faults or Electrical Shorts
Ground faults occur when electricity flows outside the intended circuit — a serious issue that requires professional attention.
Possible Causes:
- Damaged insulation
- Moisture intrusion
- Poor grounding design
Sunaura Solar’s Fix:
We locate the fault using insulation resistance testing, repair the damaged section, and ensure your system meets all safety standards.
7. Storm or Hail Damage
Texas weather can be tough on solar systems. High winds and hail can damage panels or loosen mounts.
Possible Causes:
- Cracked panels
- Shifted mounts
- Damaged flashings or leaks
Sunaura Solar’s Fix:
We provide post-storm inspections, replace damaged components, reseal mounts, and test performance after repairs.
8. Tripped Breakers or Power Interruptions
If your breakers frequently trip, it’s usually a sign of imbalance or overload in your solar electrical system.
Possible Causes:
- Faulty inverter
- Incorrect breaker sizing
- Electrical surges
Sunaura Solar’s Fix:
We test breakers and inverters, rebalance the electrical load, and replace damaged components to restore stable operation.
9. Corrosion Around Mounts or Junctions
Moisture exposure can lead to corrosion, weakening the electrical pathway and roof protection.
Possible Causes:
- Old or damaged seals
- Improperly installed mounts
- Long-term exposure to standing water
Sunaura Solar’s Fix:
We replace worn flashings, reseal all penetrations, and clean corroded areas to protect both your roof and electrical integrity.
10. Outdated Equipment or Poor Installation
Systems installed years ago — or by inexperienced contractors — may not meet current performance or code standards.
Possible Causes:
- Incorrect wiring layout
- Outdated components
- Poor roof integration
Sunaura Solar’s Fix:
We perform a complete diagnostic review, bring systems up to code, and optimize your configuration for improved energy yield.
Why Homeowners Across Texas Choose Sunaura Solar
- Comprehensive Troubleshooting – We fix everything from wiring to inverter issues.
- Preventative Maintenance – Addressing small problems before they grow.
- Roof-Ready Coordination – Seamless work with roofers and contractors.
- Verified Performance – Every system tested before completion.
From Addison to Fort Worth, homeowners trust Sunaura Solar for fast, reliable solar repair and maintenance solutions that last.
